Phone:  Toll Free: 800-240-1310 or Local: 770-808-0023Contact Us Site Map Home

 

Superior Trac Coat - #STC

100% Solids, Heavy Duty, Laminated Flooring System

Superior Trac Coat is a heavy duty, laminated, high quartz filled epoxy flooring system developed for industrial environments. Superior Trac Coat consist of multiple layers of 100% solids, clear or pigmented epoxy binder and quartz aggregate.    View Color Chart

 

Uses

Advantages

Superior Trac Coat may be used for surfacing, patching, chemical resistance, skid-resistance and abrasion resistance in areas such as:

  • Outstanding Wear Resistance
  • High Compressive Strength
  • Slip-Resistance
  • Easily Cleaned Surface
  • Chemical-Resistance
  • Seamless
  • No VOC
  • High Physical Strength
  • Abrasion Resistant
  • USDA Accepted

 

  • Food Processing Plants
  • Heavy Manufacturing
  • Educational Facilities
  • Warehouses
  • Recreational Facilities
  • Correction Facilities
  • Supermarkets
  • Pharmaceutical Labs
  • Hotels & Restaurants
  • Pulp & Paper Mills
  • Health Care Facilities
  • Bottling Plants
  • Automobile Assembly Plants
  • Textile Mills
  • Docks & Ramps
  • Chemical Plants

Mixing & Application Superior Gloss Clear LV

Mix 2 volumes of part A to 1 volume of part B. Mix thoroughly, being sure to scrape the sides and bottom with a strong mixing stick or a slow speed drill with a paint propeller attachment. DO NOT mix more than can be applied in 20 minutes. Apply mixed material by brush, roller or squeegee at 150 to 200 square feet per gallon (8-10 mils). The coverage will depend on the texture of the surface. Apply toppings before primer becomes tack-free, approximately 2-3 hours at 72oF.

 

Superior Gloss Clear

Mix 2 volumes of part A with 1 volume of part B. Mix thoroughly, being sure to scrape the sides and bottom with a strong mixing stick or a slow speed drill with a paint propeller attachment. DO NOT mix more than can be applied in 20 minutes. Apply mixed material with a notched squeegee at 90 to 110 square feet per gallon. Back roll with a short nap roller to level. Aggregate should be broadcast to excess over freshly rolled quartz binder. After curing, sweep un-adhered excess aggregate from the surface. For higher build, repeat application of quartz binder and aggregate.

 

Seal Coat

To apply the topcoat of Superior Gloss over the Superior Top mortar overlay: stir each component separately. Clear: Mix 2 volumes of part A with one volume of part B. Pigmented: Mix 1 volume of part A with 1 volume of part B. Mix thoroughly, being sure to scrape the sides and bottom, with a strong mixing stick or slow speed drill equipped with a paint propeller. DO NOT mix more that can be applied in 30 minutes. As a coating, apply mixed material by brush or roller. For best results, two coats should be applied. Allow the first coat to cure overnight. Apply the second coat within 24 hours. If more time than 24 hours has elapsed, a light sanding of the first coat is required. Superior Gloss can be placed as thick as desired on horizontal surfaces without affecting the cure.  When chemical-resistance is needed substitute Superior Novalac for Superior Gloss

 

Specification

  • Color: Various
  • Pot Life (100 Grams): 20-30 minutes (neat)
  • Tensile Strength: 3900 psi (ASTM C-307)
  • Tensile Elongation: 8% (ASTM D-1044)
  • Water Absorption: < 1% (ASTM C-413)
  • Shelf Life: 1 Year
  • Coverage: Coating: 90-110 square feet
  • Cure Schedule: Light traffic: 24 hours at 75oF|Full exposure: 72 Hours at 75oF
  • Application Temperature: 55-90oF
  • Solids by Weight: 1
  • Abrasion Resistance: 0.05 (ASTM D-1044)
  • Flexural Strength: 4,500 psi (ASTM C-580) (Tabor Abrader C-10 wheel, 1000 gram load 1000 cycles)

 

Estimation Chart

COVERAGE FOR COATING OR MEMBRANES

Thickness of Coating Applied
(1000 mils = 1 inch)
Coverage per U.S. Gallon
100% Solids System
1/4 inch = 250 mils 6.4 Square Feet
3/16 inch = 187.5 8.5 Square Feet
1/8 inch = 125mills 12.8 Square Feet
100mils 16.0 Square Feet
1/16 inch = 62.5 mils 25.5 Square Feet
50 mils 32.0 Square Feet
1/32 inch = 31.25 mils 51.0 Square Feet
20 mils 80.0 Square Feet
1/64 inch = 15.625 mils 102.0 Square Feet
10 mils 160.0 Square Feet
5 mils 320.0 Square Feet
1 mil 1600.0 Square Feet

If coating contains a solvent which will evaporate, thickness of coating
will be reduced by same percentage as solvent loss.

 

     

2527 Lantrac Court

Decatur Georgia GA 30035
Info@SuperiorEpoxies.com

Toll Free

Phone: 800-240-1310    Fax: 800-240-7662

Local

Phone: 770-808-0023    Fax: 770-808-6777

Copyright © 2015 - Superior Epoxies, Inc.