Phone:  Toll Free: 800-240-1310 or Local: 770-808-0023Contact Us Site Map Home

 

Superior Patch Binder Gel - #SPBG

Non-Sag, 100% Solids, 1:1 Mix Ratio Epoxy Gel

SUPERIOR PATCH BINDER GEL is a two component, gel consistency, 100% solids, epoxy adhesive system designed to bond cured concrete to cured concrete. SUPERIOR PATCH BINDER GEL may also be used for bonding steel in concrete as well as many other miscellaneous construction materials.

 

Uses

Advantages

  • Cured concrete bonder.
  • Adhesive for miscellaneous construction materials.
  • Epoxy mortar for vertical and overhead patching.
  • Moisture insensitive.
  • Easy 1:1 mix ratio.
  • 100% solids, conforms to VOC regulations.
  • Moderate working time.

Surface Preparation

The surface must be clean and free of any dust, oil, grease, laitance, curing compounds or any other contaminants. This should be achieved by sandblasting, water blasting or some other mechanical means. New concrete surfaces may be acid etched with muriatic acid and rinsed thoroughly. Surface may be dry or damp, but must be free of standing water.

 

Mixing & Application

The individual components should be mixed prior to combining them. Do not mix more material than can be used in 40 minutes. Mix thoroughly, 1 part by volume, component A with 1 part by volume of component B in a suitable clean container and mix with a low speed drill until a uniform color is obtained. The sides and bottom of the mixing container should be scraped frequently to ensure complete mixing. The Kol mixer is ideal for this operation. The receiving surface should be primed with the neat epoxy mix prior to placing the mortar mix.

 

Limitations

  • Do NOT apply when temperature is below 40oF.
  • Do NOT apply to latex modified mortar or concrete.

Clean Up

Clean tools and equipment immediately with a suitable solvent such as xylene or lacquer thinner.

 

Caution

For professional use only. Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin. See Material Safety Data Sheet for proper handling and required safety equipment.

 

Specification

  • Packaging: 2 gallon units,10 gallon units,100 gallon units
  • Mix Ratio by Volume: 1:1
  • Color: Part A - White; Part B - Black
  • Pot Life (100 Grams): 35-45 minutes
  • Bond Strength: 1500 psi minimum, 14 day moist cure (ASTM C-882)
  • Compressive Modulus: < 130,000 psi (ASTM D-695)
  • Water Absorption: < 1 %
  • Shelf Life: 1 Year
  • Shore D Hardness: 65 - 75 D (ASTM D-9940)
  • Consistency: Gel
  • Weight per gallon: 11.95
  • ASTM C-881: Type III, Grade 3, Classes B & C
  • Coverage: 231 cu. in./gallon

 

   

     

2527 Lantrac Court

Decatur Georgia GA 30035
Info@SuperiorEpoxies.com

Toll Free

Phone: 800-240-1310    Fax: 800-240-7662

Local

Phone: 770-808-0023    Fax: 770-808-6777

Copyright © 2015 - Superior Epoxies, Inc.