Phone:  Toll Free: 800-240-1310 or Local: 770-808-0023Contact Us Site Map Home

 

Superior Patch - #SP4178

Easy to Use, Ready Mix Epoxy Mortar

SUPERIOR PATCH 4178 is a 100% solids, two component, equal volume mix, aggregate filled epoxy mortar. SUPERIOR PATCH 4178 is a non-sag gel with excellent adhesion, physical properties, and ease of use as a versatile, general purpose adhesive mortar that can even be placed on vertical and overhead surfaces.

 

Uses

  • Mortar/adhesive for general repair and maintenance.
  • Filler for cracks, voids and other defects in concrete and other masonry surfaces.
  • Adhesive to join concrete to concrete or other masonry surfaces,
  • Adhesive to attach tiles, glass, sanitary coving tile and other materials to wall or floor surfaces where high strength bond is required.
  • Forming coves at juncture of floor and walls in below grade waterproofing.
  • Adhesive for setting dowels, bolts and rebars.

Advantages

  • Easy to use 1:1 by volume mix ratio.
  • Non-sag for vertical application.
  • Color coded to ensure thorough mixing.
  • 100% solids, conforms to VOC regulations.
  • High strength.
  • Moisture insensitive.
  • Non shrinking.
  • Excellent adhesion.

Surface Preparation

Surface must be clean and free of any dust, oil, grease, laitance, curing compounds or any other contaminants. This should be achieved by sand blasting, water blasting or some other mechanical means. New concrete surfaces may be acid etched with muriatic acid and rinsed thoroughly. The surface must be dry or damp, and must be free of standing water.

 

Mixing & Application

Stir both A & B components before mixing together. Mix equal volumes of Part A and Part B. Mix thoroughly with a heavy duty, low speed drill fitted with a mixing paddle. Mix until a uniform gray color with no streaks is evident. Be sure to scrape the sides and bottom of the mixing pail. Do not mix more material than can be used in 40 minutes. Apply mixed material by trowel, spatula or putty knife. When used as adhesive, cover both surfaces when possible and then bring into intimate contact. Remove excess before curing. When used as a mortar on vertical and overhead patches, limit depth of patch to 1/2-1" to prevent sagging. Allow first layer to set before applying additional material. When used on floors, fill holes up to 4" deep in one layer. Avoid feather-edging. For smooth finish, keep tools lightly "wetted" with mineral spirits.

 

Limitations

  • Do NOT apply when temperature is below 50oF.
  • Do NOT apply to latex modified mortar or concrete.

Clean Up

Clean tools and equipment immediately with a suitable solvent such as xylene or lacquer thinner.

 

Caution

For professional use only. Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin. See Material Safety Data Sheet for proper handling and required safety equipment.

 

Specification

  • Packaging: 2 gallon units,10 gallon units, 1/2 gallon units
  • Mix Ratio by Volume: 1:1
  • Color: Part A White; Part B Black; Gray mixed
  • Pot Life (100 Grams): 45-60 Minutes
  • Compressive Strength: 7,000 psi (ASTM D-695)
  • Tensile Strength: 1,800 psi (ASTM D-638)
  • Tensile Elongation: 2-4% (ASTM D-638)
  • Shelf Life: 2 Year
  • Viscosity: Thixotropic paste
  • Shore D Hardness: 75 5 (ASTM D-2240)
  • Coverage: 231 cu. in./gallon
  • Shrinkage: Nil

 

     

2527 Lantrac Court

Decatur Georgia GA 30035
Info@SuperiorEpoxies.com

Toll Free

Phone: 800-240-1310    Fax: 800-240-7662

Local

Phone: 770-808-0023    Fax: 770-808-6777

Copyright © 2015 - Superior Epoxies, Inc.